MyKi Pulse Oximeter
DESCRIPTION OF THE PRODUCT
MyKi Oximeter is an easy-to-use device that allows you to check your blood oxygen saturation (SpO2) and heart rate. The device is small, compact, easy to use and very reliable. It is equipped with an LCD display for maximum convenience.
APPENDIX
The MyKi Oximeter is a reusable device designed to measure blood oxygen saturation and heart rate in adults in clinical, hospital and home settings. The device is not suitable for long-term condition monitoring.
TARGET AUDIENCE
The device is intended for use with adult patients. Do not use the device on small children, babies and newborns to avoid adverse skin reactions.
CONTRAINDICATIONS
The device is intended for use with adult patients. Do not use the device on children, infants and newborns to avoid adverse skin reactions.
HOW IT WORKS?
The principle of operation of the device is based on the emission of infrared light through hemoglobin. The transport of a substance by light is based on the Beer-Lambert law, which determines the concentration of a solute (oxyhemoglobin) in a solvent (hemoglobin) that can be determined by light absorption. Blood density depends on blood oxygen levels, and blood with a high concentration of oxygen has a red color due to a high concentration of oxyhemoglobin. When the concentration decreases, the blood takes on a bluish color due to a greater presence of deoxyhemoglobin (the combination of hemoglobin molecules with carbon dioxide). That is, the operation of the device is based on spectrophotometry, measuring the amount of light transmitted through the patient's capillaries, synchronized with the heartbeat.
SAFETY INFORMATION
• Read the leaflet before using the Myki Oximeter.
• MyKi Oximeter is intended only as an adjunct to patient assessment. It should be used in conjunction with clinical signs and symptoms. It is not intended as a device,
used for treatment.
• When using the MyKi Oximeter together with electrosurgical equipment, the user must pay attention and ensure the safety of the patient being measured.
• EXPLOSION HAZARD: Do not use the MyKi Oximeter in the presence of flammable anesthetics, explosive substances, vapors or liquids.
• Make sure not to use the MyKi Oximeter during an MRI (Nuclear Magnetic Resonance Imaging) or CT (Computed Tomography) scan because the induced current can cause burns.
• MyKi Oximeter does not have an alarm function. Not suitable for long-term monitoring.
• No modifications are allowed to this product. Maintenance must be performed by professional service personnel who are approved by the manufacturer.
• Please turn off the power before cleaning the MyKi Oximeter. Never allow disinfection of the device with high pressure and high temperature. Never use cleaners/disinfectants other than those recommended.
• The product is not waterproof. Keep its surface dry, clean and prevent liquids from entering.
• MyKi Oximeter is precise and fragile. Avoid pressure, impact, strong vibration or other mechanical damage. Hold it gently and lightly. If not in use, the device must be stored appropriately.
• To dispose of the MyKi Oximeter and its accessories, follow local regulations and policies regarding the disposal of similar products. Do not throw them away.
• Use AAA alkaline batteries. Do not use carbon or poor quality batteries. Remove the batteries if the product will not be used for a long time.
• Before taking measurements with the device, you should carefully read the user manual or consult a doctor and/or the manufacturer beforehand. If you feel any discomfort during use, stop using it immediately and seek medical attention.
• Avoid static electricity before using the MyKi Oximeter.
• When in use, keep the MyKi Oximeter away from radio receivers.
• If the MyKi Oximeter uses an unspecified and unconfigured EMC test system, it may increase electromagnetic radiation or reduce anti-electromagnetic interference in performance. Please use the specified configuration.
• Portable and mobile communication equipment may interfere with the normal operation of the MyKi Oximeter.
• MyKi Oximeter should not be near or stacked with other equipment. If you do have to, you should monitor and make sure that the device can work normally with the configuration you are using.
• Make sure there are no dirt or wounds in the place where you will place the device.
PRODUCT CHARACTERISTICS
• Easy and convenient use of the product.
• Compact, light and easy to carry.
• Low power consumption. Up to 15 hours of operation with one set of batteries. (one measurement lasts 1 min.)
• The low voltage reminder is displayed on the screen when the battery is low.
• Automatic shutdown after 10 seconds with no signal generated.
• Bluetooth connectivity and data transfer to a mobile device.
Manufacturer:
Shanghai Berry Electronic Tech Co., Ltd
Unit 104, 1 fl. Building 7, No. 1188 Lianhang Road,
Minhang district, Shanghai, China 201112
Prolinx GmbH
Brehmstr. 56, 40239, Düsseldorf, Germany
Distributor
Alterco Trading Ltd
Sofia, 103 Cherni Vrah Blvd
