ARTELAC TRIPLE ACTION eye drops 10ml
Artelac Triple Action (Artelac Triple Action)
Instructions for use
Read these instructions for use carefully - they contain important information on how to use this product. If you have any questions, ask your pharmacist, your doctor or contact us.
0.24% sodium hyaluronate, carbomer, glycerol, lipid component (medium chain triglycerides), sodium hydroxide and water for injections.
Purpose : eye lubricant
What is Artelac Triple Action?
Artelak Triple action is opaque eye drops, solution containing 0.24% hyaluronic acid (as sodium hyaluronate), carbomer, glycerol and lipid component (medium chain triglycerides) and water for injections.
The advanced formula has a very high tolerability, as it does not contain preservatives and buffers.
After opening, it can be used for 6 months .
What is the purpose of Artelac Triple Action?
Artelak Triple Action is an eye lubricant that supports all three layers of the tear film to improve the hydration of the ocular surface in the presence of dry eye sensations.
When should you use Artelac Triple Action?
Artelak Triple Action is inspired by the design of the natural tear film. Contains the natural humectant hyaluronic acid (as sodium hyaluronate) found in the structures of the healthy human eye and the natural tear film and two additional humectants: glycerol and carbomer. Containing an additional lipid component (medium-chain triglycerides), Artelac Triple Action supports all three layers of the tear film: lipid, aqueous and mucin phase.
Artelac Triple Action is designed to stay on the surface of the eye for a long time, providing intensive moisturization for immediate, long-lasting symptom relief. An ideal product for anyone suffering from a range of dry eye symptoms such as fatigue, strain, gritty eyes, burning and/or watery eyes.
How often should you use Artelac Triple Action?
Apply one drop of Artelac Triple Action in the eye as needed. You can use it every day and as often as you want. There is no limit on the duration of use.
How to use Artelak Triple action?
Artelak's patented Triple Action pump mechanism allows the eye drop solution to be preservative-free, but the dropper bottle may not look like the ones you've used in the past.
Note: Wash your hands before each use. Avoid contact of the bottle tip with fingers or eyes to prevent possible contamination of the solution or injury.
1. Before each use, remove the protective cap from the top of the bottle with a twisting motion. | |
2. Attention! Before the first use and if the bottle has not been used for a while: Turn the bottle upside down and press the pump mechanism repeatedly until a drop is released. | |
3. Hold the bottle as shown: Place your thumb on the ergonomic thumb rest and cup the bottom with your fingers. Two fingers should be placed at the bottom of the bottle. | |
4. Turn the bottle upside down. Tilt your head back slightly. Gently pull down the lower eyelid with the finger of your free hand, hold the bottle in a vertical position above the eyes and squeeze the pump mechanism to apply one drop into the eye. Then close the eye and slowly blink to distribute the drop optimally over the surface of the eye. | |
5. Immediately after use, look for/remove any remaining drops and put the protective cap back on the top of the bottle. | |
Due to the design of the bottle, a small amount of solution remains in it. However, said filled volume can be completely removed from the bottle.
When should you not use Artelac Triple Action?
Do not use the product if you are hypersensitive to any of the ingredients.
Important information about the use of Artelac Triple action?
- Local hypersensitivity reactions are rarely reported. In such cases, treatment should be discontinued. If you experience prolonged discomfort or irritation, discontinue use and consult your doctor.
- The product may cause temporary blurring of vision after application, which may negatively affect the ability to drive and operate machinery.
- Do not touch the surface of the eye with the tip of the bottle to prevent possible injury to the surface of the eye or contamination of the solution.
- After application, shake off any remaining drops.
- After opening the bottle, do not share it with others.
- Careless use of the product contrary to the instructions for use may cause the product to slip from the hand and cause eye injury
- Remove contact lenses before use.
- Wait 15 minutes before using another eye product or before reinserting the contact lenses.
- Discard the medical device 6 months after first opening.
- Do not use after the expiration date.
- Do not use if package or bottle is damaged.
- Artelak Triple Action is in a bottle with small plastic parts that can be swallowed by small children. Choking hazard. Therefore, Artelak Triple Action should be kept out of the reach of children.
How to store Artelak Triple action?
To be stored at a temperature of +1 - +25°C.
The design of the bottle allows you to use Artelak Triple Action up to 6 months after opening.
Types of packaging:
Artelak Triple Action is available in packs of 10 ml eye drops.
Symbols
Sterilized using aseptic processing techniques | |
Temperature limit | |
Do not use if packaging is damaged. | |
6 M | Discard the medical device 6 months after opening. |
See instructions for use | |
Caution: Consult the Instructions for Use for information such as warnings and precautions | |
| Good until |
Part. no | |
Manufacturer |
Manufacturer:
Dr. Gerhard Mann
chem.-pharm. Fabrik GmbH
Brunsbütteler Damm 165-173,
13581 Berlin, Germany
Representative for Bulgaria:
PHARMASUIS EOOD
St. Troyanski prohod 16, floor 3, apartment 8 and 10
1612 g.k. The camp
Sofia
Text update date: 2018-08
